en:digging_a_trench_with_a_slope_using_a_rotary_laser []

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
====== DIGGING A TRENCH WITH A 2% SLOPE USING A ROTARY LASER ======

----
====== Method 1: knowing the height of the laser relative to a point. ======
<WRAP centeralign>
{{ :uses_cases_-_e_f_g-05.jpg?direct | creuser une tranchée avec une pente de 2% à l'aide d'un laser rotatif}}
</WRAP>

<WRAP group>
<WRAP columns>

<WRAP third column box>
{{ :en:screen_400x266_en_g_1_01.png?direct |}}
<WRAP leftalign><fs medium>Activate Slope mode.</fs></WRAP>
</WRAP>

<WRAP third column box>
{{ :en:screen_400x266_en_g_1_02.png?direct |}}
<WRAP leftalign><fs medium>Enter 2%, then confirm.</fs></WRAP>
</WRAP>

<WRAP third column box>
{{ :en:screen_400x266_en_g_1_03.png?direct |}}
<WRAP leftalign><fs medium>Align your boom with the trench.</fs></WRAP>
</WRAP>
</WRAP>
</WRAP>

<WRAP group>
<WRAP columns>

<WRAP third column box>
{{ :en:screen_400x266_en_g_1_04.png?direct |}}
<WRAP leftalign><fs medium>Activate Laser mode.</fs></WRAP>
</WRAP>

<WRAP third column box>
{{ :en:screen_400x266_en_g_1_05.png?direct |}}
<WRAP leftalign><fs medium>Click on « Define laser height ».</fs></WRAP>
</WRAP>

<WRAP third column box>
{{ :en:screen_400x266_en_g_1_06.png?direct |}}
<WRAP leftalign><fs medium>Enter “**4.71m**” and confirm.</fs></WRAP>
</WRAP>
</WRAP>
</WRAP>

<WRAP group>
<WRAP columns>

<WRAP third column box>
{{ :en:screen_400x266_en_g_1_07.png?direct |}}
<WRAP leftalign><fs medium>Catch the laser beam.</fs></WRAP>
</WRAP>

<WRAP third column box>
{{ :en:screen_400x266_en_g_1_08.png?direct |}}
<WRAP leftalign><fs medium>The entered laser height (4.71m) is displayed, and in this example, the calculation shows that the bucket is 3.55m from the bottom of the trench.</fs></WRAP>
</WRAP>


</WRAP>
</WRAP>



----


====== Method 2: without knowing the height of the laser. ======


<WRAP centeralign>
{{ :uses_cases_-_e_f_g-06.jpg?direct | creuser une tranchée avec une pente de 2% à l'aide d'un laser rotatif}}
</WRAP>

<WRAP group>
<WRAP columns>

<WRAP third column box>
{{ :en:screen_400x266_en_g_2_01.png?direct |}}
<WRAP leftalign><fs medium>Activate Slope mode.</fs></WRAP>
</WRAP>

<WRAP third column box>
{{ :en:screen_400x266_en_g_2_02.png?direct |}}
<WRAP leftalign><fs medium>Enter 2% and confirm.</fs></WRAP>
</WRAP>

<WRAP third column box>
{{ :en:screen_400x266_en_g_2_03.png?direct |}}
<WRAP leftalign><fs medium>Align your boom with the trench.</fs></WRAP>
</WRAP>
</WRAP>
</WRAP>

<WRAP group>
<WRAP columns>

<WRAP third column box>
{{ :en:screen_400x266_en_g_2_04.png?direct |}}
<WRAP leftalign><fs medium>Activate laser mode.</fs></WRAP>
</WRAP>

<WRAP third column box>
{{ :en:screen_400x266_en_g_2_05.png?direct |}}
<WRAP leftalign><fs medium>Click on «depth».</fs></WRAP>
</WRAP>

<WRAP third column box>
{{ :en:screen_400x266_en_g_2_06.png?direct |}}
<WRAP leftalign><fs medium>Place the bucket tip on the benchmark, then enter “**2.5m**” and confirm.</fs></WRAP>
</WRAP>
</WRAP>
</WRAP>

<WRAP group>
<WRAP columns>

<WRAP third column box>
{{ :en:screen_400x266_en_g_2_07.png?direct |}}
<WRAP leftalign><fs medium>Catch the laser.</fs></WRAP>
</WRAP>

<WRAP third column box>
{{ :en:screen_400x266_en_g_2_08.png?direct |}}
<WRAP leftalign><fs medium>In this example, the calculation shows that the laser is "**4.71m**" from the bottom of the trench, and the bucket is "**2.50m**" from the bottom.</fs></WRAP>
</WRAP>
</WRAP>
</WRAP>

===== Download the PDF =====
<WRAP center round download 60%>
 {{ :en:manual_instruction_digging_a_trench_with_a_2_slope_using_a_rotary_laser.pdf | Click here to download the manual in PDF format}}
</WRAP>