Différences

Ci-dessous, les différences entre deux révisions de la page.

--- en:digging_a_trench_using_a_rotary_laser_en2 [2025/12/16 12:23] – La page de traduction a été créée clotilde
+++ en:digging_a_trench_using_a_rotary_laser_en2 [2025/12/16 12:23] (Version actuelle) – clotilde
@@ Ligne 1: / Ligne 1: @@
-====== DIGGING A TRENCH USING A ROTARY LASER EN2 ======
+====== DIGGING A TRENCH USING A ROTARY LASER ======
+===== Method 1: Using the known height of the laser relative to a reference point. =====
+<WRAP centeralign>
+{{::uses_cases_-_d-01.jpg?direct|}}
+</WRAP>
+<WRAP group>
+<WRAP columns>
+<WRAP third column box>
+{{:en:screen_400x266_en_d_01.png?direct|}} \\
+<WRAP leftalign><fs medium>Activate laser mode.</fs></WRAP>
+</WRAP>
+<WRAP third column box>
+{{:en:screen_400x266_en_d_02.png?direct|}} \\
+<WRAP leftalign><fs medium>Click on “Set laser height.”</fs>
+</WRAP>
+</WRAP>
+<WRAP third column box>
+{{:en:screen_400x266_en_d_03.png?direct|}} \\
+<WRAP leftalign><fs medium>Enter “4.71m” and confirm.</fs></WRAP>
+</WRAP>
+</WRAP>
+</WRAP>
+<WRAP group>
+<WRAP columns>
+<WRAP third column box>
+{{:en:screen_400x266_en_d_04.png?direct|}} \\
+<WRAP leftalign><fs medium>Catch the laser beam.</fs></WRAP>
+</WRAP>
+<WRAP third column box>
+{{:en:screen_400x266_en_d_05.png?direct|}} \\
+<WRAP leftalign><fs medium>The entered laser height (4.71m) is displayed, and in this example, the calculation shows that the bucket is "3.30m" above the bottom of the trench.</fs></WRAP>
+</WRAP>
+<WRAP third column box>
+{{::d.png?direct|}} \\
+<WRAP leftalign><fs medium>Then, for each movement of your machine, click on the button above to catch the laser beam.</fs></WRAP>
+</WRAP>
+</WRAP>
+</WRAP>
+===== Method 2: without knowing the height of the laser. =====
+<WRAP centeralign>
+{{::uses_cases_-_d-02.jpg?direct|}}
+</WRAP>
+<WRAP group>
+<WRAP columns>
+<WRAP third column box>
+{{:en:screen_400x266_en_d_06.png?direct|}} \\
+<WRAP leftalign><fs medium>Activate Laser Mode.</fs></WRAP>
+</WRAP>
+<WRAP third column box>
+{{:en:screen_400x266_en_d_02_2.png?direct|}} \\
+<WRAP leftalign><fs medium>Click on the «depth» icon.</fs></WRAP>
+</WRAP>
+<WRAP third column box>
+{{:en:screen_400x266_en_d_08.png?direct|}} \\
+<WRAP leftalign><fs medium>PLACE the tip of the bucket on the benchmark, THEN enter “2.5m” and confirm.</fs></WRAP>
+</WRAP>
+</WRAP>
+</WRAP>
+<WRAP group>
+<WRAP columns>
+<WRAP third column box>
+{{:en:screen_400x266_en_d_09.png?direct|}} \\
+<WRAP leftalign><fs medium>Catch the laser beam.</fs></WRAP>
+</WRAP>
+<WRAP third column box>
+{{:en:screen_400x266_en_d_10.png?direct|}} \\
+<WRAP leftalign><fs medium>The calculated laser height is displayed at "4.71m" and your bucket is still at the reference point, "2.5m" from the bottom of the trench.</fs></WRAP>
+</WRAP>
+<WRAP third column box>
+{{::d.png?direct|}} \\
+<WRAP leftalign><fs medium>Then, for each movement of your machine, click on the button above to catch the laser. </fs></WRAP>
+</WRAP>
+</WRAP>
+</WRAP>
+===== Download the PDF =====
+<WRAP center round download 60%>
+ {{ :en:manual_instruction_digging_a_trench_using_a_rotary_laser.pdf | Click here to download the manual in PDF format}}
+</WRAP>