en:change_depth_en

Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

en:change_depth_en [2025/12/16 12:11] – La page de traduction a été créée clotildeen:change_depth_en [2025/12/16 12:11] (Version actuelle) – clotilde
Ligne 1: Ligne 1:
-====== CHANGE DEPTH EN ======+====== CHANGE DEPTH ======
  
 +----
 +===== Method 1: without laser =====
 +<WRAP centeralign>
 +{{ ::uses_cases_-_e_f_g-01.jpg?direct | changer la profondeur}}
 +</WRAP>
 +
 +==== Option 1: Change Depth → Directly modify the current depth ====
 +
 +<WRAP group>
 +<WRAP columns>
 +
 +<WRAP third column box>
 +{{ :en:screen_400x266_en_e_methode1_1_01.png?direct |}}
 +<WRAP leftalign><fs medium>Place your bucket on your reference point (in our example at "2.50m") and then click on “depth.”</fs></WRAP>
 +</WRAP>
 +
 +<WRAP third column box>
 +{{ :en:screen_400x266_en_e_methode1_1_02.png?direct |}}
 +<WRAP leftalign><fs medium>We want to raise our earthworks by 0.10m, so the new value will be "2.40m" (2.50m – 0.10m), then confirm.</fs></WRAP>
 +</WRAP>
 +
 +<WRAP third column box>
 +{{ :en:screen_400x266_en_e_methode1_1_03.png?direct |}}
 +<WRAP leftalign><fs medium>The bucket remains at the initial benchmark, but the depth is now 0.10 m shallower.</fs></WRAP>
 +</WRAP>
 +</WRAP>
 +</WRAP>
 +
 +==== Option 2: Move the reference → we add or subtract an offset. ====
 +
 +<WRAP group>
 +<WRAP columns>
 +
 +<WRAP third column box>
 +{{ :en:screen_400x266_en_e_methode1_2_01_v2.png?direct |}}
 +<WRAP leftalign><fs medium>Click on the “Move Reference” and “Move Reference Up” icons.
 +</fs></WRAP>
 +</WRAP>
 +
 +<WRAP third column box>
 +{{ :en:screen_400x266_en_e_methode1_2_02.png?direct |}}
 +<WRAP leftalign><fs medium>Enter the offset value, in this case "0.10m".</fs></WRAP>
 +</WRAP>
 +
 +<WRAP third column box>
 +{{ :en:screen_400x266_en_e_methode1_2_03.png?direct |}}
 +<WRAP leftalign><fs medium>The height between the bucket and the reference point has decreased by "0.10m".
 +</fs></WRAP>
 +</WRAP>
 +
 +</WRAP>
 +</WRAP>
 +
 +----
 +
 +===== Method 2: without knowing the height of the laser. =====
 +
 +<WRAP centeralign>
 +{{ ::uses_cases_-_e_f_g-02.jpg?direct | changer la profondeur}}
 +</WRAP>
 +
 +==== Option 1: Directly edit the height Bucket / Reference ====
 +
 +<WRAP group>
 +<WRAP columns>
 +
 +<WRAP third column box>
 +{{ :en:screen_400x266_en_e_methode2_1_01.png?direct |}}
 +<WRAP leftalign><fs medium>Now, your bucket is "3.30m" from your ground level and the laser beam is at "4.71m". Click on “depth”.</fs></WRAP>
 +</WRAP>
 +
 +<WRAP third column box>
 +{{ :en:screen_400x266_en_e_methode2_1_02.png?direct |}}
 +<WRAP leftalign><fs medium>Enter a new height that is "0.10m" lower than the current value (3.30m -> 3.20m), then confirm.</fs></WRAP>
 +</WRAP>
 +
 +<WRAP third column box>
 +{{ :en:screen_400x266_en_e_methode2_1_03.png?direct |}}
 +<WRAP leftalign><fs medium>The Bucket, Reference and Laser Reference heights have decreased by "0.10m": the bottom of the trench is now "0.10m" higher than before the change.</fs></WRAP>
 +</WRAP>
 +
 +</WRAP>
 +</WRAP>
 +
 +==== Option 2: Directly edit the Laser/Reference height. ====
 +
 +<WRAP group>
 +<WRAP columns>
 +
 +<WRAP third column box>
 +{{ :en:screen_400x266_en_e_methode2_2_01.png?direct |}}
 +<WRAP leftalign><fs medium>Click on “Laser Height”; the reference is currently "4.71m".</fs></WRAP>
 +</WRAP>
 +
 +<WRAP third column box>
 +{{ :en:screen_400x266_en_e_methode2_2_02.png?direct |}}
 +<WRAP leftalign><fs medium>Enter a new height that is "0.10m" lower than the current value (4.71m -> 4.61m), then confirm.</fs></WRAP>
 +</WRAP>
 +
 +<WRAP third column box>
 +{{ :en:screen_400x266_en_e_methode2_2_03.png?direct |}}
 +<WRAP leftalign><fs medium>The “Bucket/Reference” and “Laser/Reference” heights have decreased by "0.10m": the bottom of the trench is now "0.10m" higher than before the change.</fs></WRAP>
 +</WRAP>
 +
 +</WRAP>
 +</WRAP>
 +
 +==== Move the reference ====
 +
 +<WRAP group>
 +<WRAP columns>
 +
 +<WRAP quarter column box>
 +{{ :en:screen_400x266_en_e_methode2_3_01.png?direct |}}
 +<WRAP leftalign><fs medium>Click on the “Move reference” icon.</fs></WRAP>
 +</WRAP>
 +
 +<WRAP quarter column box>
 +{{ :en:screen_400x266_en_e_methode2_3_02_v2.png?direct |}}
 +<WRAP leftalign><fs medium>Choose “Move up referenceˮ.</fs></WRAP>
 +</WRAP>
 +
 +<WRAP quarter column box>
 +{{ :en:screen_400x266_en_e_methode2_3_03.png?direct |}}
 +<WRAP leftalign><fs medium>Enter the offset value, in this case "0.10m".</fs></WRAP>
 +</WRAP>
 +
 +<WRAP quarter column box>
 +{{ :en:screen_400x266_en_e_methode2_3_04.png?direct |}}
 +<WRAP leftalign><fs medium>The Bucket height / Laser/height references have decreased by "0.10m": the bottom of the trench is now "0.10m" higher than before the change.</fs></WRAP>
 +</WRAP>
 +
 +</WRAP>
 +</WRAP>
 +
 +===== Download the PDF =====
 +<WRAP center round download 60%>
 + {{ {{ :en:manual_instruction_e_en.pdf | Click here to download the manual in PDF format}}
 +</WRAP>
  
  • en/change_depth_en.1765883464.txt.gz
  • Dernière modification : 2025/12/16 12:11
  • de clotilde